Hague Camslide Easyglide 640

ALL FOOTAGE SHOT BY JET PRODUCTIONS

Available To Buy Now – www.cameragrip.co.uk – Shipping Worldwide

A PROFESSIONAL LINEAR CAMERA TRACKING SYSTEM
Choice of two track lengths, 1000mm or 640mm.

Camslide Easyglide Kit includes:- Track, 2 End Supports, Carriage with lock and Camera Screw.

The Camslide Easyglide is quick and simple to set up, it can be mounted to any sturdy tripod or placed on a table, or on the floor for low shots. The camera can be fastened directly to the carriage, or an optional Video or Ball Levelling Head can be used between the camera and carriage, this enables the camera angle to be adjusted.

KEY FEATURES – Extra wide track and carriage for extra stability. – Carriage with internal bearings for superior alignment and smoother movement, plus mounting holes for accessories. Supports up to 8kg.

THE TRACK/RAIL
There is a choice of two track lengths, 1000mm or 640mm. Should you require a longer length the optional Rail Connector enables the track to be joined together.
The track is 80mm wide with both 1/4″ and 3/8″ mounting holes in the centre on both rails and also at each end on the 1000mm rail, this enables the track to be mounted on the head of a tripod or directly onto the legs of the tripod. For extra stability the 1000mm track can be mounted across two tripods using the mounting holes at each end of the track.
Two Rail Supports are also supplied, one for each end of the track, which support the Cam-Slide track when it is used on a table or the floor and also prevents the carriage from coming off the end of the track. Optional Rail Supports with 4 self aligning adjustable feet are also available.

THE CARRIAGE
The Carriage is 105mm wide and 100mm long, it is this extra width that gives the carriage much more stability and smoother movement than other sliders on the market. The 4 low friction bearings on this carriage are not “bolted on”, they are incorporated within the carriage, this prevents any miss alignment or any accidental knocks that can easily send external bearings out of alignment making the carriage stiff to move. We have also decided not to incorporate Hybrid Roller Bearings into the carriage as they are prone to picking up dirt and grit off the track, preventing smooth movement if the track it is not kept clean.
The carriage has a 1/4″ screw in the centre to mount the camera to the carriage, also supplied is a stepping collar to convert the camera screw to 3/8″ should you wish to mount a head that has a 3/8″ threaded mounting hole. There is also a second hole for a head to be attached using a 3/8″ screw. At each corner of the carriage are 4 threaded holes, 3 x 6mm and 1 x 1/4″, these can be used to mount an articulated arm for a monitor or any other accessory. Also on this top plate is a mounting hole for the Hague Power Slider’s drive cable.
On the side of the carriage is a thumb screw to lock the carriage in a fixed position or it can also be used to add drag to the movement.

Once the camera is mounted onto the carriage you can create super smooth tracking shots as you slide the carriage down the track. The track is 1000mm ( 39.5″ ) long, giving a maximum camera movement of 900mm ( 35.5 ” ). Suitable for all camcorders and cameras, supports up to 8kg when used on the ground, table or across two tripods.
The double rail track is made from hard anodized aluminium and the carriage has low wear, low friction bearings that do not require lubrication. It is resistant to dirt and dust.

Track:- Length 1000mm/640mm. Width 80mm. End Supports:- Width 205 x 38mm. Carriage:- Length 100mm. Width 105mm.

Buy online from www.cameragrip.co.uk

This entry was posted on Thursday, July 24th, 2014 at 11:24 am and is filed under Corporate videos.